Chemical composition
The raw materials are mainly polyethylene (PE) and polypropylene (PP), and polyvinyl chloride and polyamide can also be used. The leaves are painted green to imitate natural grass, and ultraviolet absorbers need to be added.
Polyethylene (PE): It feels softer, and its appearance and sports performance are closer to natural grass, which is widely accepted by users. It is the most widely used raw material for artificial grass fiber in the 21st century
Polypropylene (PP): The grass fiber is harder and is generally suitable for tennis courts, playgrounds, runways or decorations. The wear resistance is slightly worse than polyethylene
Nylon: It is the earliest raw material for artificial grass fiber and belongs to the first generation of artificial grass fiber. The grass is soft and comfortable to the feet.
Material structure
Artificial turf consists of 3 layers of materials. The base layer is composed of a compacted soil layer, a gravel layer and an asphalt or concrete layer. The base layer is required to be solid, non-deformed, smooth and impermeable, that is, a general concrete field. Due to the large area of the hockey field, the base layer must be handled well during construction to prevent sinking. If a concrete layer is laid, expansion joints should be cut after the concrete solidifies to prevent thermal expansion deformation and cracks.
Above the base layer is a buffer layer, usually made of rubber or foam plastic. Rubber has moderate elasticity and a thickness of 3~5mm. Foam plastic is less expensive, but has poor elasticity and a thickness of 5~10mm. If it is too thick, the lawn will be too soft and easy to sag; if it is too thin, it lacks elasticity and cannot play a buffering role. The buffer layer must be firmly attached to the base layer, usually with white latex or all-purpose glue.
The third layer, which is also the surface layer, is the turf layer. Depending on the surface shape of the manufacturing, there are fluff turf, circular curly nylon turf, leaf-shaped polypropylene fiber turf, and permeable turf woven with nylon filaments. This layer must also be glued to the rubber or foam plastic with latex. During construction, the glue must be fully applied and pressed tightly in sequence without wrinkles.
Abroad, there are two common types of turf layers: 1. The turf layer has thinner leaf-like fibers, only 1.2~1.5mm; 2. The turf fibers are thicker, 20~24mm, and are filled with quartz almost to the top of the fibers.
Composition Structure Of Artificial Turf
Jun 06, 2025

